What would you suggest for the control system? LED or LCD?
LED shows the charge level, On-Off and Level of assist selection.
LCD has lots of features and settings including:
Speed, Distance, Time, ODO, Charge, level of assist, battery Voltage, real time power, ambient temperature, security password, cruise control, back lighted, headlight control, power limit setting, speed limit setting, etc.
One important advantage of the LCD version is that the system has a diagnostic feature which shows the error code in case of a failure. That makes it much easier for you and us to resolve the technical problems while installation or operation.
We're Happy to help:
Still can't find the solution?
Or
2. Connect with our agents through live chats 
Related Articles
LCD Controller Users’ Manual
The Conversion kits feature a LCD3 display. The illustrated manual will help you understand and be familiar with the meter function, guiding you on how to operate the meter, how to set the project parameters, how to achieve the best match of the ...System does not turn on
System does not turn on Connections are not completed Do a thorough check from battery power lines to controller and all other connectors Battery is turned off Turn battery on using the on/off switch on the battery Battery is dead See if battery ...The system is on, but motor is not running using both throttle or pedal assist
The brake cut-off circle sign is showing on top of screen The brake cut-off sensors are not properly installed or adjusted on brake levers. To let the system rub, unplug the brake sensors from main controller. Test the motor, then try re-installing ...System works but cannot read anything on the display Display
LCD issue Needs parts replacementAfter 5 hours charge, the LCD display is still showing half battery. Is something wrong with battery or charger?
The display charge indicator has a lagging system so that it’ll stabilize in cases of voltage fluctuations. Switch the bike ON Ride for 10-15 sec, and the bars will show full. At no load condition ~42V is fully charged ~32V is fully discharged. You ...