System works but cannot change anything on the display

System works but cannot change anything on the display

Keypad or display issue

Needs parts replacement

---

We're Happy to help:

Still can't find the solution?

1. Please fill up the support form at the link below:

​

                  

       

                                  Or

2. Connect with our agents through live chats  

• Related Articles

• System works but cannot read anything on the display Display

  LCD issue Needs parts replacement

• Throttle or display malfunction after installing mirror or accessories on the handlebar

  A- Mirror or accessories is rubbing Throttle moving part causing the issue Displace them and create a reasonable clearance with throttle No physical contact between installed items yet the throttle or controller has issues or not working Throttle ...

• System does not turn on

  System does not turn on Connections are not completed Do a thorough check from battery power lines to controller and all other connectors   Battery is turned off Turn battery on using the on/off switch on the battery   Battery is dead See if battery ...

• The system is on, motor is not running using throttle but works with pedal assist

  When hitting throttle nothing changes on the screen Throttle has connection or other issues. Error info 01 shows up Check throttle positioning. It might have been stuck or rubbing grip or other handlebar stuff or Throttle is broken  If no ...

• The system is on, motor is not running using pedal assist but with Throttle

  PAS sensor disconnected Check wires and connections Red LED on the PAS sensor does not flash when spinning the crank forward Check magnet disk working surface  Make sure magnet disk is spinning together with crank and not loose Check gap and spacing ...