Motor works on and off while pedaling, but fine when using throttle PAS
magnet disk on the crank is loose or wobbling
Fix it in place using epoxy or flexible heat or silicon glue. Align the disk with sensor.
We're Happy to help:
Still can't find the solution?
Or
2. Connect with our agents through live chats 
Related Articles
The system is on, motor is not running using throttle but works with pedal assist
When hitting throttle nothing changes on the screen Throttle has connection or other issues. Error info 01 shows up Check throttle positioning. It might have been stuck or rubbing grip or other handlebar stuff or Throttle is broken If no ...The system is on, motor is not running using pedal assist but with Throttle
PAS sensor disconnected Check wires and connections Red LED on the PAS sensor does not flash when spinning the crank forward Check magnet disk working surface Make sure magnet disk is spinning together with crank and not loose Check gap and spacing ...The system is on, but motor is not running using both throttle or pedal assist
The brake cut-off circle sign is showing on top of screen The brake cut-off sensors are not properly installed or adjusted on brake levers. To let the system rub, unplug the brake sensors from main controller. Test the motor, then try re-installing ...Throttle or display malfunction after installing mirror or accessories on the handlebar
A- Mirror or accessories is rubbing Throttle moving part causing the issue Displace them and create a reasonable clearance with throttle No physical contact between installed items yet the throttle or controller has issues or not working Throttle ...System works but cannot read anything on the display Display
LCD issue Needs parts replacement