Motor making extra noise
It's normal when motor is loaded on hills
No action
Motor normal vibration is causing resonance on other bicycle components such as disk brake rotor, fenders, etc.
Try dis-positioning or changing vibration properties of the part by sticking something to or between parts.
We're Happy to help:
Still can't find the solution?
Or
2. Connect with our agents through live chats 
Related Articles
The system is on, but motor is not running using both throttle or pedal assist
The brake cut-off circle sign is showing on top of screen The brake cut-off sensors are not properly installed or adjusted on brake levers. To let the system rub, unplug the brake sensors from main controller. Test the motor, then try re-installing ...System works but cannot read anything on the display Display
LCD issue Needs parts replacementSystem works but cannot change anything on the display
Keypad or display issue Needs parts replacementThe system is on, motor is not running using throttle but works with pedal assist
When hitting throttle nothing changes on the screen Throttle has connection or other issues. Error info 01 shows up Check throttle positioning. It might have been stuck or rubbing grip or other handlebar stuff or Throttle is broken If no ...Motor works on and off while pedaling, but fine when using throttle PAS
magnet disk on the crank is loose or wobbling Fix it in place using epoxy or flexible heat or silicon glue. Align the disk with sensor.