Is it necessary to modify the fork drop out?
Dropouts are usually 9 to 10mm considering the paint coat and filing 0.25mm or 0.5mm. Either sides is sometimes necessary and OK.
We're Happy to help:
Still can't find the solution?
Or
2. Connect with our agents through live chats 
Related Articles
Is it dangerous to have the motor on the front fork?
That depends on whether you’ve done your due diligence. Here are the reasons why hub motor fail, and why forks, regardless from steel or alloy, break: 1- Forcing the axle into the drop out and causing pre stress. 2- Inappropriate order or direction ...SR Suntour General Suspension Fork Manual
Download the manualCan I leave the battery on the bike all the time? Is turning it off after a ride necessary?
Leaving the battery on the bike at all times is a netter of battery security. If you park the ebike in an area with risk of being stolen, take the battery with you. If you leave the battery switched on, it drains with a very little current, so it is ...what do you recommend for Brompton ebike conversion kit from ebikebc?
Brompton folding bike has 16inch rim with 75mm fork spacing and 8mm drop out which is not considered bicycle industry standard. We can offer a 350W direct drive front hub motor for 75mm fork spacing and 8mm drop out. The battery and controller system ...ENVO SnowBike Conversion Kit
You can download the manual below.