Error info 1 - throttle abnormality
If you are facing the error 1 on your LCD3 Display please follow the following troubleshooting advice and hopefully it will resolve the issue.
- Make sure the throttle level is in ideal state and don’t apply throttle while booting up system.
- Check the cables, wire can be stretched or damaged or the three-pin throttle connector could have been damaged.
- Check the 9-pin connector on the controller side. The pins are bend when not inserted correctly.
We're Happy to help:
Still can't find the solution?
Or
2. Connect with our agents through live chats 
Related Articles
Error info 5 - speed sensor abnormality
If you are facing the error 5 on your LCD3 Display please check for motor cables which might be damaged.Error info 2 - motor hall sensor abnormality
If you are facing the error 2 on your LCD3 Display please check for motor cables from wheel axel which might be damaged. Check for any kind of stretch wires or damaged cables from motor to controller and replace the wire if you see any damage.Error info 4 - torque sensor abnormality
If you are facing the error 4 on your LCD3 Display please follow the following troubleshooting advice and hopefully it will resolve the issue. - Check PAS sensor on the crankshaft, as you rotate the pedals the LED should blink. - See the alignment of ...0x25 Torque signal error (related to brake/throttle/PAS) on 750C
This error usually happens when brake/throttle applied and then turning on the bike. Keep the brake/throttle/pas in ideal condition don’t apply brake or throttle and let the system completely bootup.The system is on, motor is not running using throttle but works with pedal assist
When hitting throttle nothing changes on the screen Throttle has connection or other issues. Error info 01 shows up Check throttle positioning. It might have been stuck or rubbing grip or other handlebar stuff or Throttle is broken If no ...