Controller power bullet connectors are melted

Controller power bullet connectors are melted

Loose connectivity cause sparks which fries and melt the connector.

Replace the bullet connector. Crimp properly and make sure the connector will stay fully connected.



    We're Happy to help:

    Still can't find the solution?

    1. Please fill up the support form at the link below:
    ‚Äč
                      
           
                                      Or
    2. Connect with our agents through live chats  

      • Related Articles

      • Power cuts out while riding and screen goes off

        Battery runs out of charge Charge the battery LCD display waterproof cable connector is loose. Re-connect and check all other connectors in the line.  Loose conductivity between battery and bracket Check connector pins for sparks or being loose. ...
      • System does not turn on

        System does not turn on Connections are not completed Do a thorough check from battery power lines to controller and all other connectors   Battery is turned off Turn battery on using the on/off switch on the battery   Battery is dead See if battery ...
      • Battery to mounting bracket connector is melted;

        Dust and dirt may cause loose connectivity in between surfaces of batter insert and mounting bracket prongs. System may work but any shake may cause sparking which causes blades getting hot and melting the plastic supports. Make sure you keep ...
      • Controller getting too hot when riding long on hills

        It's normal up to 70C If more, try making some ventilation. open the controller bag's second expansion zip and cut some holes for ventilation there. 
      • Throttle or display malfunction after installing mirror or accessories on the handlebar

        A- Mirror or accessories is rubbing Throttle moving part causing the issue Displace them and create a reasonable clearance with throttle No physical contact between installed items yet the throttle or controller has issues or not working Throttle ...