Can we use our own motor with the snow kit?

Can we use our own motor with the snow kit?

If the motor has the same dimensions and is compatible with our controller and batteries then it could theoretically work, but its not suggested as the motor may be under powered (and not give required performance), or it may be overpowered (damage transmission and lead to shorter life of snow kits). 

---

We're Happy to help:

Still can't find the solution?

1. Please fill up the support form at the link below:

​

                  

       

                                  Or

2. Connect with our agents through live chats  

• Related Articles

• ENVO SnowBike Conversion Kit

  You can download the manual below. 

• ENVO Conversion Kit User Manual

  Please find the conversion kit manual below.

• Is the EbikeBC geared from motor kit -motor noisy?

  Generally when ebike motors are in use, there will be a slight noise. Noise occurs when you’re switching controls, partially because of the gears and magnets are cogging against each other, which is inevitable. The gears are made of Nylon, and have ...

• Can I use the ebike in the rain and snow?

  The system is rain proof. It’s good for rain or snow, however we advise against water jetting. Most importantly, do not park in the rain or snow.

• Is it possible to use a non electric snowbike kit with a mid-drive ebike?

  It's gonna be tough to match a 125mm wide track with an existing mid-drive due to little chain off-set. For regular bicycle conversion we have the option to replace the crank axle to longer one, but for mid drive motor it's not generally doable ...