Battery connector cleaning, easy to do on the controller any suggestions on the battery, the contacts are hard to get at and what product is best for this cleaning?

Battery connector cleaning, easy to do on the controller any suggestions on the battery, the contacts are hard to get at and what product is best for this cleaning?

It is very important to keep battery conductors clean, specially when ebike is used in a dust or dirt. Particles between battery and battery bracket conductors may cause loose connectivity, sparking resulted in melting plastic parts.
How to clean?
1- Blowing air if you have an air compressor
2- Paint or tooth brush
3- Quick drying contact cleaner sprays

    We're Happy to help:

    Still can't find the solution?

    1. Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    2. Connect with our agents through live chats  

      • Related Articles

      • Which electric bike motor system is best for me? How do I choose the right product?

        Find the right bicycle type for your physical shape and kind of application (Mountain bike, hybrid, upright, step-thru, cruiser, recumbent, Tandem, Delta trike, recumbent trike, etc.).  This should be concluded by you with the help of your health ...

      • Which electric bike is best for me? How do I choose the right product?

        Find the right bicycle type for your physical shape and kind of application (Mountain bike, hybrid, upright, step-thru, cruiser, recumbent, Tandem, Delta trike, recumbent trike, etc.).  This should be concluded by you with the help of your health ...

      • LCD Controller Users’ Manual

        The Conversion kits feature a LCD3 display. The illustrated manual will help you understand and be familiar with the meter function, guiding you on how to operate the meter, how to set the project parameters, how to achieve the best match of the ...

      • Can ENVO motor/controller handle 48 volts battery?

        Firstly note that higher Voltage will only increase max speed, which will be out of street legal criteria  and does not affect torque or traction. Controller is not capable of 48V but if you replace the controller with a 48V motor should be fine as ...

      • Error info 6 - motor /controller cable short circuit

        When wires are looped in the same place or zip tie is tighten too much, then in overload condition the wires may get heated and might get damage. This can be observer from controller side. Please check the cable and let us know.