0x25 Torque signal error (related to brake/throttle/PAS) on 750C
This error usually happens when brake/throttle applied and then turning on the bike.
Keep the brake/throttle/pas in ideal condition don’t apply brake or throttle and let the system completely bootup.
We're Happy to help:
Still can't find the solution?
Or
2. Connect with our agents through live chats 
Related Articles
Error info 1 - throttle abnormality
If you are facing the error 1 on your LCD3 Display please follow the following troubleshooting advice and hopefully it will resolve the issue. - Make sure the throttle level is in ideal state and don’t apply throttle while booting up system. - Check ...Error info 4 - torque sensor abnormality
If you are facing the error 4 on your LCD3 Display please follow the following troubleshooting advice and hopefully it will resolve the issue. - Check PAS sensor on the crankshaft, as you rotate the pedals the LED should blink. - See the alignment of ...Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...What do parameters like Torque (Nm) mean for ebikes?
Motor Torque is the characteristic which reflects the traction (thrust) and is important for climbing up hills. The traction force equals Torque divided by wheel radius (F=T/R). The more torque at the wheel gives you a higher grade-ability. The ...The system is on, but motor is not running using both throttle or pedal assist
The brake cut-off circle sign is showing on top of screen The brake cut-off sensors are not properly installed or adjusted on brake levers. To let the system rub, unplug the brake sensors from main controller. Test the motor, then try re-installing ...